We have formulated more than 60,000 different colors. Many colors are available in ENERGY STAR, LEED, and title 24 formulations. Click HERE to browse our color gallery.
You can request a color sample online by clicking HERE or call us at 1-888-306-2645.
Find a reputable graphics or graphics design provider that has a color correct computer system. They can provide true RGB values. Please note that colors appear differently on different electronic devices such as copiers, printers, scanners, etc.
Click HERE or contact one of our customer service representatives at 1-888-306-2645.
Valspar sells coil and extrusion coatings to approved applicators. Our approved applicators have the expertise and the equipment to properly apply the coatings.
For a listing of protective coil coating applicators, click HERE or contact a Valspar Representative at kbright@valspar.com or call us toll free at 1-888-306-2645.
To specify a Valspar product, refer to the "To Specify" section at the bottom of the product data sheet. Product data sheets can be find on individual product pages.
From the home page of Valsparcoilextrusion.com, log onto MyAccount. If you do not have a login, click on register and follow instructions.
The molecules on the surface of Valspar's fluoropolymer coating systems are so tightly bound together that they don't want to react with anything. Their slick surface helps make them resistant to many elements found in the environment such as air pollution, acid rain, and general airborne dirt. Although Valspar factory-applied finishes are extremely durable, a periodic cleaning to remove build-ups of resins and other residue is a good idea to extend coating life. A variety of methods for removal of surface deposits are available. Simple washing with plain water using hoses or pressure spray equipment is usually adequate. When heavy deposits of dirt or other contaminants dull surfaces, stronger methods may be needed.
See PDF below for detailed cleaning and maintenance instructions for fluoropolymer coatings.
Valspar's silicone polyester coatings are resistant to many elements found in the environment such as air pollution, acid rain, and general airborne dirt. However, if the need to clean or remove deposits from your coating does arise, a variety of methods for removal of surface deposits are available. Two precautions: (1) do not use wire, brushes, abrasives, or similar cleaning tools which will mechanically abrade the coatings surface, and (2) certain cleaning agents listed below should be tested in an inconspicuous area before use on a large scale.
See PDF below for detailed cleaning and maintenance instructions for silicone polyester coatings.
Polyester coatings are resistant to many elements found in the environment such as air pollution, acid rain, and general airborne dirt. However, if the need to clean or remove deposits from your coating does arise, a variety of methods for removal of surface deposits are available. Two precautions: (1) do not use wire brushes, abrasive, or similar cleaning tools which will mechanically abrade the coatings surface, and (2) certain cleaning agents listed below should be tested in an inconspicuous area before use on a large scale.
See PDF below for detailed cleaning and maintenance instructions for polyester coatings.
The small parallel lines seen on lab prepared panels are the result of the application method used in the laboratory. To achieve a uniform thickness of coating in the laboratory, wire wrapped around metal rods is used to apply the coating. The amount of coating applied is controlled by the diameter of the wire used. The wire wound rods apply a wavy film that results in small parallel lines when the coating is drawn down the panel.
Valspar does not encourage re-coating; however, we realize that it is sometimes necessary. If re-coating is required, Valspar recommends the following procedure:
It is Valspar's position to not be responsible for field claims resulting from re-coated coils.
Valspar offers several finishes with a metallic or pearlescent appearance in our extrusion and coil coating product lines. Fluropon Classic® and Fluropon Classic® II are available in both spray and coil formulations. Acrodize® coatings are available only in spray formulations.
When a sparkle effect is desired, we recommend using the newer, mica flake formulation technology due its many advantages. Although similar in appearance, pearlescent coatings are formulated with mica flakes while metallic coatings are formulated with metal flakes.
Mica flakes offer better color consistency and it is easier to work with them. They minimize "tiger striping" and the "flop-of-flake" effect in spray application. This phenomenon can make the color appear different from panel to panel. The mica flakes found in Fluropon Classic II will not pick up an electrostatic charge or follow the back and forth movements of electrostatic application equipment like metal flakes will.
Click on the link below to view the entire document and learn about mica and metallic paint systems.
Best Practice Guidelines for Mica and Metallic Paint Systems
We have formulated more than 60,000 different colors. Many colors are available in ENERGY STAR, LEED, and title 24 formulations. Click HERE to browse our Color gallery.
You can request a color sample online by clicking HERE or call us at 1-888-306-2645.
Find a reputable graphics or graphics design provider that has a color correct computer system. They can provide true RGB values. Please note that colors appear differently on different electronic devices such as copiers, printers, scanners, etc.
Simply click HERE and to browse and request literature.
Valspar sells coil and extrusion coatings to approved applicators. Our approved applicators have the expertise and the equipment to properly apply the coatings.
To find an approved applicator, please visit our approved applicators page or call one of our friendly customer service representatives at 1-866-351-6900.
This qualification is based on periodic visits to their facility by Valspar technical personnel and on periodic submittals of production panels for verification that the finished products continue to meet the specification requirements. If you are interested in becoming an approved applicator, let us know by sending an email to extrusionhelp@valspar.com.
To specify a Valspar product, refer to the "To Specify" section at the bottom of the product data sheet. You can find the product data sheets on each product page.
From the homepage of Valsparcoilextrusion.com, log onto MyAccount. If you do not have a login, click on register and follow the instructions.
Flurocryl® coatings by Valspar are inert coating systems. The surface of this system has excellent resistance to many elements found in the environment such as air pollution, acid rain, and general airborne dirt. Proper cleaning and maintenance of this Flurocryl system is important to ensure that it continues to provide a beautiful, long lasting finish.
When the need arises to clean deposits from the Flurocryl coating, a variety of methods are available. In cleaning this system three precautions should be observed: 1) do not use abrasives (i.e., Comet cleanser), wire brushes, or similar cleaners or tools which mechanically abrade the surface, 2) prior to utilizing a household, commercial or industrial cleaning agent, the list of ingredients must be reviewed to ensure that the cleaner is free from the solvents discussed below, and 3) any cleaning agent should be tested in an isolated area before using on a large scale.
The molecules on the surface of Valspar's fluoropolymer coating systems are so tightly bound together that they don't want to react with anything. Their slick surface helps make them resistant to many elements found in the environment such as air pollution, acid rain, and general airborne dirt.
Although Valspar factory-applied finishes are extremely durable, a periodic cleaning to remove build-ups of resins and other residue is a good idea to extend coating life. A variety of methods for removal of surface deposits are available. Simple washing with plain water using hoses or pressure spray equipment is usually adequate. When heavy deposits of dirt or other contaminants dull surfaces, stronger methods may be needed.
See PDF below for detailed cleaning and maintenance instructions for fluoropolymer coatings.
Polyester coatings are resistant to many elements found in the environment such as air pollution, acid rain, and general airborne dirt. However, if the need to clean or remove deposits from your coating does arise, a variety of methods for removal of surface deposits are available. Two precautions: (1) do not use wire brushes, abrasive, or similar cleaning tools which will mechanically abrade the coatings surface, and (2) certain cleaning agents listed below should be tested in an inconspicuous area before use on a large scale.
See PDF below for detailed cleaning and maintenance instructions for polyester coatings.
Click PDF below for Valspar's Spray Code Numbering System Reference Guide.
Valspar offers several finishes with a metallic or pearlescent appearance in our extrusion and coil coating product lines. Fluropon Classic® and Fluropon Classic® II are available in both spray and coil formulations. Acrodize® coatings are available only in spray formulations.
When a sparkle effect is desired, we recommend using the newer, mica flake formulation technology due its many advantages. Although similar in appearance, pearlescent coatings are formulated with mica flakes while metallic coatings are formulated with metal flakes.
Mica flakes offer better color consistency and it is easier to work with them. They minimize "tiger striping" and the "flop-of-flake" effect in spray application. This phenomenon can make the color appear different from panel to panel. The mica flakes found in Fluropon Classic II will not pick up an electrostatic charge or follow the back and forth movements of electrostatic application equipment like metal flakes will.
Click PDF below to learn more about Valspar's Mica and Metallic Paint Systems.
Yes, Valspar Solar Reflective coatings are available from leading metal building component manufacturers. Architects that want these products for their projects should specify one of Valspar's factory-applied, baked-on solar reflective coatings.
The American Recovery and Reinvestment Act of 2009 signed on February 17 by President Obama extends the timeframe for US Federal tax credits for homebuilders through 2010. The other credit guidelines originally established by the Energy Policy Act of 2005 for new home construction remain the same. Guidelines for the credit are listed below. $2000 Credit Guidelines.
A wide variety of colors including greens, reds, dark browns, and black are available in SR coating formulations.
Due to the varying size of buildings and their locations, as well as varying cooling units, an exact number is not possible. However, studies as done by Florida Power and Light validate the savings. Florida Power and Light built six identical 1700 ft2 residences in Ft.Myers, Florida. They found the prepainted metal roof saved 23% in energy costs compared to asphalt shingles.
Yes. Valspar Solar Reflective Coatings are best suited for warm to hot climates.
Valspar SR coatings will last for the same length of time as the original formulas.
Very little change in both solar reflectivity value and emissivity value is expected. This information is based on data gathered from coating samples that have been on Valspar's test fence in Ft. Myers, Florida for more than ten years.
Ultraviolet, visual and infrared spectra are the components of natural sunlight. A compilation of these components is measured using a solar spectrum reflectometer in accordance to ASTM E 903/ C 1549. The closer the value is to 1.0, the more efficiently the surface reflects heat.
Emissivity is measured using an emissometer. The emissometer is operated in accordance to ASTM E 408/C 1371. It uses a heated thermopile radiation detector.
The solar reflective values of Valspar SR coatings range from 0.25 up to 0.85. Coatings with metallic or pearlescent effects generally have slightly lower emissivity values.
Bare metal will have a lower emissivity than prepainted metal. Prepainted metals generally fall in the 0.80 to 0.90 emissivity range, while bare metals are typically less than 0.10 emissivity.
Yes. Steel's recycling rate is about 2/3 according to the American Iron and Steel Institute. About 1/3 of the aluminum used in the US comes from recycled material according to the US Aluminum Association.
The urban heat island effect refers to the rise of temperatures in urban areas relative to the surrounding rural or natural areas due to the high concentration of heat-absorbing surfaces. Valspar SR coatings reduce this effect by deflecting more of the sun's rays so that the buildings will not absorb as much energy resulting in lower energy consumption iin urban areas.
Although Valspar manufactures solvent-based coatings, the factory application process allows our coaters to capture and destroy the VOCs before they escape into the atmosphere.
Download Valspar's 3-part specification guide. Everything you need to specify our products. | MORE
Valflon our FEVE coating that adds high gloss to any project. | MORE
Valspar offers the color, confidence and colloaboration to bring every project successfully to life. | MORE